VW Golf VR6 Black edition

Podforum za predstavitve vaših Volkswagen in Audi vozil

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a super98 dne Po Dec 05, 2011 11:12 am

se strinjam z jinxom. mogoče bi se potrudil nekje zbrskat 2.9 VR6
TJUNING PA TO...
Uporabniški avatar
super98
Mirko
 
Prispevkov: 3557
Pridružen: Sr Jan 25, 2006 4:30 pm
Kraj: Ljubljana
Avto: Golf II G60, MB W123 coupe

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a Slicker dne Po Dec 05, 2011 3:46 pm

za tistih 15HP več je škoda 600-800€ + generalka stran metat. ko bom povečeval konje jih bom konkretno. kdaj pa bo to ratalo pa še ne vem.
Uporabniški avatar
Slicker
Stalni uporabnik
 
Prispevkov: 1210
Pridružen: Po Maj 28, 2007 2:15 pm
Kraj: okolica Trebnjega
Avto: Golf VR6

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a super98 dne Po Dec 05, 2011 4:06 pm

samo se pozna teh 15ps
TJUNING PA TO...
Uporabniški avatar
super98
Mirko
 
Prispevkov: 3557
Pridružen: Sr Jan 25, 2006 4:30 pm
Kraj: Ljubljana
Avto: Golf II G60, MB W123 coupe

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a Slicker dne Po Dec 05, 2011 9:44 pm

pravjo ja. nisem se še peljal z 2.9 tako da ne morem rečt kaka je razlika, ampak dvomim da teh 100kubikov in 17HP naredi hudo razliko.
uglavnem zdj zbiram različne bombončke, kot so usnjene tapete in rdeči pasovi tako da nekaj se bo upam da kmalu spet začelo dogajat.
Uporabniški avatar
Slicker
Stalni uporabnik
 
Prispevkov: 1210
Pridružen: Po Maj 28, 2007 2:15 pm
Kraj: okolica Trebnjega
Avto: Golf VR6

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a Capone dne Po Dec 05, 2011 11:48 pm

Ta široki robi so že doma?
Uporabniški avatar
Capone
Stalni uporabnik
 
Prispevkov: 86
Pridružen: Pe Apr 23, 2010 10:15 pm
Avto: mk4 GTI

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a Slicker dne Po Dec 05, 2011 11:55 pm

v celju so že 3 mesce. samo ne najdem cajta da feltne razdrem, na novo pobarvam sredine in sestavim nazaj.
Uporabniški avatar
Slicker
Stalni uporabnik
 
Prispevkov: 1210
Pridružen: Po Maj 28, 2007 2:15 pm
Kraj: okolica Trebnjega
Avto: Golf VR6

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a BeniNorc dne To Dec 06, 2011 12:16 pm

ja grem vsak teden mimo. če se zmeniš da jih pripelje do AC .. [smilie=beer.gif]
Uporabniški avatar
BeniNorc
The Polish connection
 
Prispevkov: 3062
Pridružen: To Apr 08, 2008 5:02 pm
Kraj: Črnomelj
Avto: Golf .. na plinsko olje :)

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a Slicker dne To Jan 10, 2012 10:14 pm

že dolg nisem ničesar počel na avtu, tako da sem se danes končno spravil spet malo zraven. in sicer sem "uničil" sesalni kolektor. glede na to da povečevanje kanalov samo na kolektorju in ne na glavi nebi imelo učinka, sem se odločil za bolj radikalen pristop :lol: flex pa gasa :) in sicer sem poskusil kolektor od 2.8 motorja "približat" tistemu ki je na 2.9 motorju.
kolektor sem za vsak slučaj kupil drug, da je avto še vedno sestavljen in da imam še enega originalnega, če tole nebi blo ok
Slika
Slika
tukaj že izrezan del kolektorja (naj bi bil tole aluminij, ma je trdo ko kamen)
Slika
in pa končni izdelek izpod mojih rok. se pravi sem požagal še pregrade in malo obrusil. jutri ga še operem in nesem zašvasat plato čez, da bo vseskp tko ko more bit
Slika
Slika
malo sem se tud igral z brušenjem na vrhu in mi rezultat v živo ni nič kaj všeč. vem da ni to niti približek spoliranega kolektorja, ampak vseeno se bom raje odločil da ga dam pobarvat v sijaj črno barvo in se potem igral z rdečimi detajli po motornem zalivu.
Slika
pa še primerjava AAA in ABV kolektorja, če komu ni jasno kaj hočem dosečt
Slika
jutri pa upam da že nov update.
Uporabniški avatar
Slicker
Stalni uporabnik
 
Prispevkov: 1210
Pridružen: Po Maj 28, 2007 2:15 pm
Kraj: okolica Trebnjega
Avto: Golf VR6

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a 4m4t3r dne To Jan 10, 2012 11:10 pm

alo dobra zamisel samo nevem zakaj se nisi še bolj potrudo pri bušenju tistih starih sten da bi bilo ravno in nebi imel nobenih ovir, če ga že maš odprtiga! moje mišljenje!
THATS ME---->>>> THATS ME

d(>_<)b Was ist besser als sex? Audi V sechs!!!
Audi 80 Cabrio 2.8 & Audi A6 c4 2.5 TDI d(>_<)b
Uporabniški avatar
4m4t3r
Stalni uporabnik
 
Prispevkov: 3231
Pridružen: Po Dec 18, 2006 10:31 pm
Kraj: Pettau aka. Ptuj
Avto: Audi 80 Cabrio 2.8 & A6 2.5

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a Slicker dne To Jan 10, 2012 11:15 pm

Zato ker ne morem s flexom bolj zraven prit, za biax pa nimam pravega nastavka. Mislm da bi moglo bit tole cist ok.
Uporabniški avatar
Slicker
Stalni uporabnik
 
Prispevkov: 1210
Pridružen: Po Maj 28, 2007 2:15 pm
Kraj: okolica Trebnjega
Avto: Golf VR6

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a 4m4t3r dne To Jan 10, 2012 11:18 pm

Slicker napisal/-a:Zato ker ne morem s flexom bolj zraven prit, za biax pa nimam pravega nastavka. Mislm da bi moglo bit tole cist ok.

ajd če zarad orodja negre se opraviči :wink: bo eugene kaj več povedo o pretoku zraka in ovir ma ded sokolovo oko hehe
THATS ME---->>>> THATS ME

d(>_<)b Was ist besser als sex? Audi V sechs!!!
Audi 80 Cabrio 2.8 & Audi A6 c4 2.5 TDI d(>_<)b
Uporabniški avatar
4m4t3r
Stalni uporabnik
 
Prispevkov: 3231
Pridružen: Po Dec 18, 2006 10:31 pm
Kraj: Pettau aka. Ptuj
Avto: Audi 80 Cabrio 2.8 & A6 2.5

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a Slicker dne To Jan 10, 2012 11:40 pm

Eugene bo reku da nebo haska, kar jz tut mislm, samo probat pa ni greh. Pa ponucat morm dihtnge k jih mam na lagerju. :) ce ne druzga se fino pocutm k sem po dolgem cajtu neki za avto naredu :)
Uporabniški avatar
Slicker
Stalni uporabnik
 
Prispevkov: 1210
Pridružen: Po Maj 28, 2007 2:15 pm
Kraj: okolica Trebnjega
Avto: Golf VR6

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a lukavr6 dne Sr Jan 11, 2012 12:32 am

kaj pa če bi najprej men reku če ti posodim od 2.9 kolektor pa bi najprej probu če ma kej haska?

sam tko ideja, da ne bo samo na steni visel...

enako predlagam preden boš 14 dni loputo od gasa povečeval, ker jo mam tut.
... (Corrado) might be the greatest collection of bad VW ideas ever put into one car.
Uporabniški avatar
lukavr6
Stalni uporabnik
 
Prispevkov: 976
Pridružen: To Jun 23, 2009 8:00 pm
Kraj: Ljubljana
Avto: Corrado vr6, Corrado vr6, Renault Clio:)

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a Slicker dne Sr Jan 11, 2012 1:02 am

A je loputa kj vecja? Sposojat stvari si ne maram ker me murphy ne mara, za abv kolektorje pa folk hoce celo premozenje ponavad.
Uporabniški avatar
Slicker
Stalni uporabnik
 
Prispevkov: 1210
Pridružen: Po Maj 28, 2007 2:15 pm
Kraj: okolica Trebnjega
Avto: Golf VR6

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a lukavr6 dne Sr Jan 11, 2012 11:39 am

loputa je že na pogled bistveno večja. in tut nima posred aluminija, ki naj bi omejeval pretok zraka.
... (Corrado) might be the greatest collection of bad VW ideas ever put into one car.
Uporabniški avatar
lukavr6
Stalni uporabnik
 
Prispevkov: 976
Pridružen: To Jun 23, 2009 8:00 pm
Kraj: Ljubljana
Avto: Corrado vr6, Corrado vr6, Renault Clio:)

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a Slicker dne Sr Jan 11, 2012 5:00 pm

Mas kako viska?
Uporabniški avatar
Slicker
Stalni uporabnik
 
Prispevkov: 1210
Pridružen: Po Maj 28, 2007 2:15 pm
Kraj: okolica Trebnjega
Avto: Golf VR6

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a lukavr6 dne Sr Jan 11, 2012 5:03 pm

eno pa res mam ja.
... (Corrado) might be the greatest collection of bad VW ideas ever put into one car.
Uporabniški avatar
lukavr6
Stalni uporabnik
 
Prispevkov: 976
Pridružen: To Jun 23, 2009 8:00 pm
Kraj: Ljubljana
Avto: Corrado vr6, Corrado vr6, Renault Clio:)

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a MERKLIN dne Sr Jan 11, 2012 5:51 pm

O teh stvareh sem tudi jaz razmišljal, čeprav sem si jaz postavil previsoke cilje in s tega pol ni blo nič ....

moj cilj...

Slika

VSR Motor sport kolektor. :twisted:
Uporabniški avatar
MERKLIN
Stalni uporabnik
 
Prispevkov: 746
Pridružen: Ne Feb 18, 2007 3:11 pm
Kraj: Štajerc
Avto: VW Corrado G60

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a BureK dne Sr Jan 11, 2012 6:37 pm

ma kaj nima od mk4 2.8 tak tip kolektorja ? ta variabilni mislim...
Uporabniški avatar
BureK
Z jogurtom
 
Prispevkov: 10857
Pridružen: Sr Jan 25, 2006 12:34 pm
Kraj: predor Markovec
Avto: Rallye Golf

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a Slicker dne Če Jan 12, 2012 12:49 am

Tut jz spremlam te kolektorje, ma se noben ne proda izpod 700e. Luka kok cs za loputo?
Uporabniški avatar
Slicker
Stalni uporabnik
 
Prispevkov: 1210
Pridružen: Po Maj 28, 2007 2:15 pm
Kraj: okolica Trebnjega
Avto: Golf VR6

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a lukavr6 dne Če Jan 12, 2012 1:00 pm

jo bom zbrsku izpod krame ven, pa ko jo najdem se bova naprej pogovarjala :D
... (Corrado) might be the greatest collection of bad VW ideas ever put into one car.
Uporabniški avatar
lukavr6
Stalni uporabnik
 
Prispevkov: 976
Pridružen: To Jun 23, 2009 8:00 pm
Kraj: Ljubljana
Avto: Corrado vr6, Corrado vr6, Renault Clio:)

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a 4m4t3r dne Če Jan 12, 2012 2:42 pm

kaj pa je to za ena schrickova zadeva je ista kot od vw motosport?

Slika
THATS ME---->>>> THATS ME

d(>_<)b Was ist besser als sex? Audi V sechs!!!
Audi 80 Cabrio 2.8 & Audi A6 c4 2.5 TDI d(>_<)b
Uporabniški avatar
4m4t3r
Stalni uporabnik
 
Prispevkov: 3231
Pridružen: Po Dec 18, 2006 10:31 pm
Kraj: Pettau aka. Ptuj
Avto: Audi 80 Cabrio 2.8 & A6 2.5

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a MERKLIN dne Če Jan 12, 2012 3:02 pm

Podobna zadeva, tudi zelo zanimiva, vendar Motor Sport kolektor seka...

Slika

Slika
:shock:
Uporabniški avatar
MERKLIN
Stalni uporabnik
 
Prispevkov: 746
Pridružen: Ne Feb 18, 2007 3:11 pm
Kraj: Štajerc
Avto: VW Corrado G60

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a jinx82 dne Če Jan 12, 2012 4:02 pm

Sej pomoje jo je Schrick prej naredu pol so jo pa motorsportovci skopirali :)
Uporabniški avatar
jinx82
Mati bwožja
 
Prispevkov: 12575
Pridružen: To Jan 24, 2006 11:57 pm

Re: VW Golf VR6 Black edition

OdgovorNapisal/-a Jurtz dne Če Jan 12, 2012 4:27 pm

In a nutshell, you will gain minimal HP, if any. You will, however, gain torque. Some say up to 20 ft-lbs.
From the Corrado Club site:

Limited by the transverse mounting of the engine, there isn't much room for generous inlet manifolding. In order to achieve a good compromise between maximum power output, and adequate torque in day to day use, the inlet manifold runs across the top of the head. This has circumvented the shortage of space and allowed the use of an oscillating-flow tuned inlet manifold. Each cylinder has its own inlet tract that is tuned to such a length as to en- sure positive inlet pressure. As engine output is proportional to the airflow, this scheme means that the VR6 doesn't have to be ashamed in the face of competitors. The 2.8 litre produces 174 PS [ DIN hp] and a maximum torque of 240 Nm at 4200 RPM, and the 2.9 litre engine in the Corrado achieves 245 Nm at the same engine speed. But this achievement wasn't enough to satisfy the Wolfsburg developers. To achieve even more torque, lower down in the rev range, the 6 cylinders were to breathe even more freely. The idea of the variable inlet manifold [ german "variables Saugrohr" ] was born and developed in parallel with the now standard version, with assistance from the Pierburg GmbH in Neuss, a company which has a high reputation with things relating to mixture control. The VSR [ abbreviated from the german ] system did not go into, falling victim to the red pens of accountants shortly before the VR6 started production. That this piece of motor technology was not condemned to the depths of the Wolfsburg catacombs, is thanks to the interests of Volkswagen Motorsport, based in Hannover. This VW company took the VSR and now offers it as an after-market conversion kit for 2888 Marks. The kit may be fitted to all VR6s with 2.8 and 2.9 litre engines.

Even though the VSR achieves similar aims to those of the switch- ing inlet manifold of the 2.8 litre V6s from Audi, the operating principle is different. In the Audi engine, a long, narrow inlet tract achieves high torque at low revs; 245 Nm at 3000 RPM. The maximum power is achieved using a short, wide inlet tract, pro- ducing 174 PS at 5500 RPM. For the engine to be fed through the appropriate channels, depending on engine speed, inlet manifolds are switched using six individual, vacuum operated flaps at 4000 RPM. In both stages, the technology is based purely on tuned oscillating-flow in- let manifolds, with the necessary switching.

The VSR in contrast, two diverse technologies are applied. It is designed so that at low engine speeds, resonance is used to im- prove cylinder charging efficiency -- at higher RPM, oscillation- tuned, individual, broad tracts are used. Switching from one to the other is achived by a single flap, also vaccuum operated at 4000 RPM. The tuned inlet tract operates by the low pressure caused between the throttle valve and the inlet valve, by the suction of the descending piston, Through inertia of the air in the tract, the airflow tends to keep moving towards the inlet, even after it's closed, causing a slight over-pressure when the inlet valve next opens. This ensures high charge efficiency even during early stages of the induction stroke. Of course, further during the same stroke, inlet pressure falls followed by a high pressure but not before the inlet valve closes.

In order to achieve optimal control of the oscillation and re- flection of the column of air in the inlet tract, it needs to be closely coordinated with valve timing, but this is not possible due to variation in engine speed. Even at mid-range-rpm, the valve opening and the are out of synch. The second pressure wave arrives much too early before the inlet valve closes and a back- flow reduces fill efficiency. Now to achieve high torque under these conditions, resonance-fill is utilised. This is done by closing the connection flap between a small resonance chamber which is immediately before short inlet tracts above the inlet valves. This transforms the 6 cylinder ending into effectively two 3 cylinder engines with uniform firing times, and which do not have overlapping inlet strokes. Resonance pulses of up to 0.4 bar [approx 6 psi] above atmospheric are achieved, leading to remarkable fill efficiency and torque increases.

Even though fitting the VSR requires not great skills, it should be undertaken by a professional with the right tools. For exam- ple, fitting the new EPROM and the new control harness requires dexterity and special tools. The new chip doesn't alter the previously-programmed behaviour of the engine management, it only adds an additional control output for the electrically- controlled, vacuum operated flap. The kit includes instructions as to complete installion, including connections to the vaccum circuit and electrical connections.

Further engine modifications are not required, so one is permit- ted to anticipate the VSR transformation. A marked improvement in torque at mid-range is advertised with 255 Nm available at 3600 RPM on the 2.8 litre engine. This corresponds to an 11% increase at that engine speed. In the 2.9 litre incarnation, 260 Nm is available, providing more performance in the most-used rev range. There is no promise of more power in the higher RPM range.

To illustrate the performance improvement in a VSR Golf, one doesn't need any test equipment! Almost right from the start, at below 3000 RPM, a new urge is sensed. Up to 4000 RPM the engine provides markedly better acceleration, yet above, the previously expected manners appear because the torque curve corresponds to that of the standard engine. Even more! After the impetuous ac- celeration, the switchover feels almost reserved. The steeply in- creasing torque curve up to 3600 RPM also shows a rapid fall back to the norm between 3600 and 4000 RPM. The torque improvement is an excellent fit to the Golf VR6.

In fourth gear, the torque boost corresponds to 90 to 120 kmh, in fifth to 110 to 150 kmh. This turns the Golf into a sprinter, that none of the near-200 PS professionally tuned chariots comes near. Testign showed that acceleration from 90 to 120 kmh in fourth gear only took 5.4 seconds. The standard VR6 Golf took 6.1 seconds and a near-200 PS Oettinger VR6 Golf taking 6.4 seconds, and a Wendland special taking 6.2 seconds. No wonder be- cause their maximum torque happens at much higher RPM.

Unremarkably, the VSR trick didn't improve peak acceleration or top speed, both of these being exclusively in the higher rev range.

The VR6 opens up a new field for Volkswagen Motorsport tuning. This is appropriate when one expects high torque for comfortable and sporty driving. It's even more attractive because testing showed reduced fuel consumption by half a litre [ per 100 km ]. On the other hand, the VSR offers professional tuners an innova- tive platform for development - as some of them have already in- dicated.


>Has anyone else had experience with these?
>
>What's better VSR/Shrick Manifold? Why would one be better than the other?
>

Well, each has its pluses and minues:

1. You can't get a new VSR and used ones are also impossible to find (I've
been looking).

2. VSRs were not made for OBD-II cars. You will run into problems fitting an
OBD-II throttle body, although I've been told it can be 'made' to fit. Plus
the ECU changes required or external signal to cause the flap to move.

3. VSRs are very nice looking, allow access to the plugs and allow the stock
engine covers to fit. They also don't say "SCHRICK" all over them.

4. Schrick manifolds are three pieces so you don't have to remove the whole
thing to change the plugs. Still more of a pain.

5. Schick manifolds are available for OBD-I and OBD-II cars.

6. Schrick manifolds are significantly cheaper. $1500-$2000 for the Schrick.

7. Schrick manifolds don't fit properly under the Corrado hood. Right Todd?
Todd from AWE has a beautiful Corrado and is looking into a fix for
this. Its not like it blew a big dent in the top of the hood, but it did
dent the underside.

8. VSRs were controlled by a signal from the ECU. Schrick manifolds have a
separate control module. Not as nicely integrated, but makes it possible to
fit to a variety of cars. Also, the control box has switches for varying
opening RPM and hysterisis.

9. Schricks claim bigger HP numbers than VW did for its VSR.

And did I mention that you can't find VSRs anywhere?

Tom
98 GTI (VR6)
Uporabniški avatar
Jurtz
Stalni uporabnik
 
Prispevkov: 11460
Pridružen: To Jan 24, 2006 10:32 pm
Avto: '08 Golf GTI, '02 Polo Gr. A

PrejšnjaNaslednja

Vrni se na Moj avto

Kdo je na strani

Po forumu brska: 0 registriranih uporabnikov in 4 gostov